Vol. 55 No. 5 (2021): Materials and Technology

Published: 2021-09-30

HIGH ENTROPY ALLOWS A BETTER AFFINITY BETWEEN METAL IONS AND ACTIVATED CARBON FIBRES

Sang Sun Choi, Soon Hong Lee, Kyung Jae Yun, Young Min Jin, Joon Hyuk Lee

603–607
- Pdf
MANUFACTURING THINNED FRICTION-STIR WELDED 1050 ALUMINUM BY POST ROLLING: MICROSTRUCTURE AND MECHANICAL PROPERTIES

Sina Zinatlou Ajabshir, Mohsen Kazeminezhad, Amir Hossein Kokabi

609–617
- Pdf
CHARACTERIZATION OF CHEMICALS FROM PROSOPIS JULIFLORA (PJ) – A POTENTIAL ENHANCER FOR LIGHTWEIGHT POLYMER APPLICATIONS

D. Narayana Moorthy, L. Jayakumar, K. Muthukumaran

619–624
- Pdf
TAILORING SURFACE MORPHOLOGY AND TOPOGRAPHY OF SHOT-PEENED Ti6Al4V VIA GRIT BLASTING

Yasemin Yıldıran Avcu, Okan Yetik, Mert Guney, Tamer Sınmazçelik, Egemen Avcu

625–628
- Pdf
SINTERING BEHAVIOUR OF MAGNESIUM OXIDE OBTAINED FROM SEAWATER DOPED WITH NANO-TiO2

Jelena Jakić, Miroslav Labor, Vanja Martinac, Martina Perić

629–635
- Pdf
NEXAFS – SODOBNA TEHNIKA ZA ŠTUDIJ MOLEKULSKIH ORBITAL V TANKIH PLASTEH

Gregor Bavdek

637–648
- Pdf
STUDY OF THE SUITABILITY OF VARIOUS TYPES OF CASTING MATERIALS FOR THE MANUFACTURE OF A SHIP ENGINE

Juan José Galán, Nuria Varela-Fernández, Manuel Ángel Graña-López, Almudena Filgueira-Vizoso, Ana García-Diez

649–654
- Pdf
MECHANICAL TESTING OF LAMINATED COMPOSITE MATERIALS FOR PROSTHETIC SOCKETS

Matic Bombek, Uroš Vesenjak, Marko Pisek, Gaj Vidmar, Sašo Knez, Sergej Medved

655–661
- Pdf
SOLVOTHERMAL SYNTHESIS AND CHARACTERIZATION OF POROUS Co MICROSPHERES

Mingdong Zhong, Jianguo Huang, Jiasheng Yuan, Sheng Rong, Ping Ou, Xin Chen, Bei Zhang, Qiaoling Ke, Zhiyun Zhu

663–666
- Pdf
PREPARATION OF ATO NANOPOWDERS WITH Co-PRECIPITATION AND THEIR LASER-REFLECTION PROPERTIES

Jing Zhang

667–672
- Pdf
EVALUATION OF A HYBRID BIOCOMPOSITE OF HA/HDPE REINFORCED WITH MULTI-WALLED CARBON NANOTUBES (MWCNTs) AS A BONE-SUBSTITUTE MATERIAL

Ali A. Al- Allaq, Jenan S. Kashan , Mohamed T. El-Wakad , Ahmed M. Soliman

673–680
- Pdf
STUDY ON ALTERNATE IMMERSION CORROSION BEHAVIOR AND MECHANISM OF SDCM DIE STEEL FOR HOT STAMPING

Jiang Bin, Zuo Pengpeng, Wu Xiaochun

681–692
- Pdf
EFFECT OF TOOL PIN PROFILES OVER SQUARE WAVE TOOL PATH PATTERN ON FRICTION STIR WELDING OF AA6061-CU DISSIMILAR ALLOYS

Loganathan Prabhu, Satish Shanmugam, Thiagarajan Chandrasekaran

693–700
- Pdf
TREATING WASTE SLUDGE FROM WATER-PURIFICATION PLANTS WITH THE GEOPOLYMERIZATION METHOD

Do Quang Minh, Thai Tien Dat, Nguyen Hoc Thang, Kieu Do Trung Kien, Pham Trung Kien, Huynh Ngoc Minh, Nguyen Vu Uyen Nhi

701–707
- Pdf
THE INFLUENCE OF CHEMICAL COMPOSITION AND HEAT TREATMENT ON THE MECHANICAL PROPERTIES AND WORKABILITY OF THE ALUMINIUM ALLOY EN AW 5454

Alenka Šalej Lah, Maja Vončina, Irena Paulin, Jožef Medved, Peter Fajfar, Darja Volšak

709–716
- Pdf
WARM DEFORMATION BEHAVIOR OF A 65MN SPRING STEEL

Peng-fei Zhang, De-cheng Wang, Peng Cheng, Chen-xi Shao, Jun-ying Zhou, Ji-hua Huang

717–724
- Pdf
A SULPHIDE CAPACITY PREDICTION MODEL OF BLAST FURNACE SLAG

Yongchun Guo, Shen Fengman, Haiyan Zheng, Shuo Wang, Xin Jiang, Qiangjian Gao

725–732
- Pdf
HIGH-TEMPERATURE OXIDATION BEHAVIOR OF AN N5 NANOCRYSTALLINE COATING DEPOSITED BY ESD ON A NI-BASED SINGLE-CRYSTAL SUPERALLOY

Rongyan Wang, Quan Liu, Meng Wang, Xudong Lu, Cean Guo, Jian Zhang

733–740
- Pdf
EXPERIMENTAL STUDY ON THE DYNAMIC SHEAR MODULUS AND DAMPING RATIO OF SATURATED SAND UNDER CYCLIC LOADING

Jian Zhang, Jiuting Cao, Sijie Huang, Baocun Shi

741–749
- Pdf