HOT-DEFORMATION BEHAVIOR AND PROCESSING MAP OF 22MnB5 HIGH-STRENGTH STEEL

Authors

  • Hongchao Ji College of Mechanical Engineering, North China University of Science and Technology, Tangshan, 063210 China
  • Yanke Wen College of Mechanical Engineering, North China University of Science and Technology, Tangshan, 063210 China
  • Guofa Cui Tangshan Longquan Machinery Co., Ltd., Tangshan, Hebei, 063210.
  • Weichi Pei College of Mechanical Engineering, North China University of Science and Technology, Tangshan, 063210 China
  • Wenchao Xiao Shenzhen Institute for Advanced Study, University of Electronic Science and Technology of China, Shenzhen, 518000, Guangdong, China.

DOI:

https://doi.org/10.17222/mit.2023.874

Keywords:

22MnB5 high-strength steel, hot-deformation behaviour, J-C constitutive model, processing map

Abstract

In order to explore the hot formability of 22MnB5, a hot-tensile test of 22MnB5 high-strength steel plate was carried out using a Gleeble-1500 hot-tensile-testing machine. The stress-strain curves at 850 °C to 950 °C and 0.01 s–1 to 10 s–1 were obtained. The results show that 22MnB5 has an obvious positive-strain-rate sensitivity, and its peak stress decreases with the increase of temperature. The mechanical constitutive equation of 22MnB5 was established by using the improved Johnson-Cook model, and the fitting value was compared with the experimental value. Based on the dynamic material model, the hot-processing map of 22MnB5 was established and analyzed. The hot-processing process was determined as follows: deformation temperature 880 °C to 930 °C, strain rate 0.01 s–1 to 1 s–1.

Downloads

Published

2023-07-29

How to Cite

1.
Ji H, Wen Y, Cui G, Pei W, Xiao W. HOT-DEFORMATION BEHAVIOR AND PROCESSING MAP OF 22MnB5 HIGH-STRENGTH STEEL. MatTech [Internet]. 2023 July 29 [cited 2026 Nov. 16];57(4):367–378. Available from: https://mater-tehnol.si/index.php/MatTech/article/view/874

Most read articles by the same author(s)