PREPARATION AND STUDY OF A PU-MODIFIED EPOXY RESIN COLD PATCHING MIXTURE

  • Xiaofeng Huang Guangxi Beitou Transportation Maintenance Technology Group Co., Ltd., Nanning, China
  • Junhui Luo Guangxi Beitou Transportation Maintenance Technology Group Co., Ltd., Nanning, China
  • Pengfei Tang Guangxi Communications Design Group Co., Ltd., Nanning, China
  • Cheng Xie Guangxi Beitou Transportation Maintenance Technology Group Co., Ltd., Nanning, China
  • Jiangcai Chen Guangxi Beitou Transportation Maintenance Technology Group Co., Ltd., Nanning, China
Keywords: asphalt pavement, pothole repair, polyurethane prepolymer, epoxy resin, road performance

Abstract

Focusing on the problems of low strength and insufficient water stability of the cold patch mixture for asphalt pavement, a polyether polyurethane prepolymer with high activity was prepared in this experiment, and then the epoxy resin was modified with the prepolymer to prepare a kind of epoxy-resin-mixture pothole-repair material with high strength and high toughness. The content of polyurethane prepolymer was optimized using a low-temperature tensile test and a normal-environment-condition mechanical test, and the mechanical properties and road performance of the PU-modified epoxy-resin mixture were studied with a rutting test, bending test, Cantabro scattering and a splitting test. The results show that PU prepolymer-modified epoxy resin can effectively increase the toughness and strength of the binder, and that the toughness and mechanical properties of 20 phr PU prepolymer are the best. The road performance of the PU-modified epoxy-resin cold patch mixture is excellent. There is little difference between the immersion scattering loss rate and the standard loss rate, and both are less than 4 %, indicating that the mixture has excellent anti-scattering and water-loss performance. It is very suitable as a cold patch material for pavement pits. Due to its comprehensive road performance and reasonable price, the use of the PU-modified epoxy resin binder content of 4 % is recommended.

References

[1] L. Cong, F. Yang, G. Guo, M. Ren, J. Shi and L. Tan. The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review. Construction and Building Materials. 225 (2019), 1012-1025, doi:10.1016/j.conbuildmat.2019.07.213
[2] T. Wang, Y. Dra, X. P. Cai, Z. Q. Cheng, D. Zhang, Y. Lin and H. Y. Yu. Advanced cold patching materials (CPMs) for asphalt pavement pothole rehabilitation: State of the art. Journal of Cleaner Production. 366 (2022), doi:10.1016/j.jclepro.2022.133001
[3] J. Li, J. Liu, W. Zhang, G. Liu and L. Dai. Investigation of thermal asphalt mastic and mixture to repair potholes. Construction and Building Materials. 201 (2019), 286-294, doi:10.1016/j.conbuildmat.2018.12.153
[4] Zhao L D, Tan Y Q. A Summary of Cold Patch Material for Asphalt Pavements[C]. International Conference on Structures and Building Materials, 2011: 864-869.
[5] G. Cerni and A. Corradini. Compaction characteristics assessment of cold mix patching materials through gyratory shear compactor. Construction and Building Materials. 364 (2023), doi:10.1016/j.conbuildmat.2022.129926
[6] Gagandeep. Experimental study on strength characteristics of polymer concrete with epoxy resin. Materials Today: Proceedings (2020), doi:10.1016/j.matpr.2020.08.665
[7] C. Peiliang, Y. Jianying and C. Shuanfa. Effects of epoxy resin contents on the rheological properties of epoxy‐asphalt blends. Journal of Applied Polymer Science. 118 (2010) 6, 3678-3684
[8] Z. Daohong and J. Demin. Toughness and strength improvement of diglycidyl ether of bisphenol-A by low viscosity liquid hyperbranched epoxy resin. Journal of Applied Polymer Science. 101 (2006) 4, 2504-2511, doi:10.1002/app.23760
[9] P. Mikhailenko, Z. Y. Piao, M. R. Kakar, M. Bueno, S. Athari, R. Pieren, K. Heutschi and L. Poulikakos. Low-Noise pavement technologies and evaluation techniques: a literature review. International Journal of Pavement Engineering. 23 (2022) 6, 1911-1934, doi:10.1080/10298436.2020.1830091
[10] J. Chen, X. Ma, H. Wang, P. Xie and W. Huang. Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer. Construction and Building Materials. 161 (2018), 598-605, doi:10.1016/j.conbuildmat.2017.11.170
[11] J. Liu, X. Ma, Y. Tong and M. Lang. Self-healing polyurethane based on ditelluride bonds. APPLIED SURFACE SCIENCE. 455 (2018), 318-325, doi:10.1016/j.apsusc.2018.05.159
[12] J. M. Misasi, Q. Jin, K. M. Knauer, S. E. Morgan and J. S. Wiggins. Hybrid POSS-Hyperbranched polymer additives for simultaneous reinforcement and toughness improvements in epoxy networks. POLYMER. 117 (2017), 54-63, doi:10.1016/j.polymer.2017.04.007
[13] V. Mishra, J. Desai and K. I. Patel. High-performance waterborne UV-curable polyurethane dispersion based on thiol-acrylate/thiol-epoxy hybrid networks. Journal of Coatings Technology and Research. 14 (2017) 5, 1069-1081, doi:10.1007/s11998-016-9906-1
[14] M. Liu, S. Han, W. Shang, X. Qi, S. Dong and Z. Zhang. New polyurethane modified coating for maintenance of asphalt pavement potholes in winter-rainy condition. Progress in Organic Coatings. 133 (2019), 368-375, doi:10.1016/j.porgcoat.2019.04.059
Published
2023-03-30
How to Cite
1.
Huang X, Luo J, Tang P, Xie C, Chen J. PREPARATION AND STUDY OF A PU-MODIFIED EPOXY RESIN COLD PATCHING MIXTURE. MatTech [Internet]. 2023Mar.30 [cited 2026Aug.10];57(2):175–180. Available from: https://mater-tehnol.si/index.php/MatTech/article/view/748

Most read articles by the same author(s)