INVESTIGATION OF THE EFFECT OF INCONEL PARTICULATE FILLER ON THE MECHANICAL AND FIRE-RETARDANT CHARACTERISTICS OF GFRP COMPOSITES

Ravikumar Karthikeyan; Rajkumar Subbiah

doi:10.17222/mit.2022.559

Ravikumar Karthikeyan Central Institute of Petrochemicals Engineering and Technology: School for Advanced Research in Petrochemicals, Chennai, India
Rajkumar Subbiah Central Institute of Petrochemicals Engineering and Technology: School for Advanced Research in Petrochemicals, Chennai, India

DOI: https://doi.org/10.17222/mit.2022.559

Keywords: delamination, Inconel, flammability, mechanical properties

Abstract

This paper reports the effect of incorporating Inconel particles as filler for enhancing the delamination and mechanical strength of glass-fiber-reinforced epoxy composites. It is intended for application in renewable energy. Glass fiber plays a vital role in renewable-energy industries for its non-corrosiveness and lower maintenance cost. The mechanical properties of glass fibers make the renewable industry for effective utilization in the manufacturing of turbine blades in onshore and offshore environments, as well as the addition of fillers enhances the mechanical properties of the material. This study comprises validating three different compositions of Inconel blended with epoxy resin for the preparation of laminates using a vacuum-infusion process. The tensile and flexural properties of the composites were experimentally examined and validated for the enhanced use of structural applications in the field of renewable energy. In addition to the mechanical characterization, a finite-element validation was used to determine the delamination effect. The Ansys Composite PrePost (ACP) module was used to validate the Inconel-blended composite materials. The flammability characteristics were determined as per the UL-94 standard for both vertical and horizontal flame tests. The water-absorption characteristics were also estimated for the three different proportions of the Inconel-filled laminates. The study reveals that the incorporation of Inconel powder enhanced the mechanical properties, contact angle and the fire-retardant characteristics of the glass-fiber epoxy-blended laminates.

References

1. Delbariani-nejad A, Farrokhabadi A, Jafari SR. PT US CR, Int J Mech Sci., (2018), doi:10.1016/j.ijmecsci.2018.07.017
2. Susan Leigh S, James R. G. from the SAGE Social Science Collections . All Rights. Hisp J Behav Sci, 9(1987), 183-205, doi:10.1177/07399863870092005
3. Swolfs Y, Gorbatikh L, Verpoest I. Fibre hybridisation in polymer composites: A review. Compos Part A Appl Sci Manuf, 67(2014), 67:181, 200, doi:10.1016/j.compositesa.2014.08.027
4. Fotouhi M, Sadeghi S, Jalalvand M, Ahmadi M. Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering. J Thermoplast Compos Mater, 30 (2017)., 318-340, doi:10.1177/0892705715598362
5. Ma PC, Zhang Y. Perspectives of carbon nanotubes/polymer nanocomposites for wind blade materials. Renew Sustain Energy Rev, 30 (2014), 651-660, doi:10.1016/j.rser.2013.11.008
6. Zou Z, Reid SR, Li S, Soden PD. Application of a delamination model to laminated composite structures. Compos Struct, 56 (2002), 375-389, doi:10.1016/S0263-8223(02)00021-1
7. Ito H, Arai M, Takeyama K, Hu N, Quaresimin M, Impact Damage and Residual Compression Strength of CNF/CFRP Hybrid Laminates. J Solid Mech Mater Eng, 7 (2013), 381-393, doi:10.1299/jmmp.7.381
8. Zhang ZZ, Xue QJ, Liu WM, Shen WC. Friction and wear properties of metal powder filled PTFE composites under oil lubricated conditions, Wear, 210 (1997), 151-156. doi:10.1016/S0043-1648(97)00052-5
9. Zujin PAN, Jianzhong WU, Jian LIU, Xinhua Z. Fatigue Failure of a Composite Wind Turbine Blade at the Trailing Edge, 382 (2018) 191-195, doi:10.4028/www.scientific.net/DDF.382.191
10. Liu YJ, Jiang Z, Wen HM. Predicting impact induced delamination of FRP laminates. Int J Impact Eng 137 (2020) 103436, doi:10.1016/j.ijimpeng.2019.103436
11. Wilk J. Development and Implementation of a Testing Method for the Characterization of Interlaminar Delamination Propagation in Laminates Under Fatigue Mode II Loading Conditions. Trans Inst Aviat, 245 (2016), 251-261, doi:10.5604/05096669.1226901
12. Cortés R, Rodríguez NK, Ambriz RR, López VH, Ruiz A, Jaramillo D. Fatigue and crack growth behavior of Inconel 718–AL6XN dissimilar welds. Mater Sci Eng A, 745 (2019), 20-30, doi:10.1016/j.msea.2018.12.087
13. Gupta N, Brar BS, Woldesenbet E. Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy. Bull Mater Sci. 24 (2001),219-223, doi:10.1007/BF02710105
14. Pincheira G, Ferrada N, Hinojosa J, Montecino G, Torres L, Saavedra K. A study of interlaminar properties for a unidirectional glass fiber reinforced epoxy composite. Proc Inst Mech Eng Part L J Mater Des Appl, 233 (2019), 348-357, doi:10.1177/1464420718816731
15. Yang B, Mao Y, Zhang Y, Wei Y, Liu W, Qiu Y. Fast-curing halogen-free flame-retardant epoxy resins and their application in glass fiber-reinforced composites. Text Res J. 89 (2019), 3700-3707, doi:10.1177/0040517518819845
16. Gu JJ, Huang ZM. Assessing delamination initiation of angle-ply laminates from fiber and matrix properties. J Thermoplast Compos Mater 32 (2019), 1601-1621, doi:10.1177/0892705718799840
17. Colonel L, Corps AD. E f f e c t o f m e t a l fillers on s o m e p h y s i c a l p r o p e r t i e s o f a c r y l i c resin. 61 (1989), doi: 10.1016/s0022-3913(89)80055-1