INVESTIGATION OF THE FACTORS AFFECTING THE STRENGTH OF A METAL-RUBBER INTERFACE JOINED BY VULCANIZATION: A REVIEW
Keywords:
rubber-to-metal bonding, vulcanization, surface treatment, rubber-metal interface
Abstract
Metal-rubber parts are used in many sectors because of their ability to combine the advantages of both rubber and metals. Thanks to the advances acquired as a result of the studies carried out by researchers and industries, the usage area of metal-rubber parts expands day by day. The focus of researchers in this field continues to be on achieving effective joints, improving their durability, and ensuring their preservation, as these composites find wide-ranging use. In particular, the positive effects of newly developed surface treatments and adhesive materials on bond strengths have been observed in recent years. Within the scope of this study, the metal-rubber bonding mechanism, vulcanization, bonding during/after vulcanization, some standards related to rubber, bond failures, and their causes are investigated. This review focuses on studies addressing the factors influencing the interfacial strength of metal-rubber bonds joined by vulcanization. Additionally, it provides information on studies and their findings up to date regarding the effects of vulcanization parameters, corrosive environments, components in the bonding process, and different substrates on the bond strength.
References
1 P.E. Hurley, History of natural rubber, J. Macromol. Sci., Chem., 15 (1981) 7, 1279-1287, doi:10.1080/00222338108056785
2 W. Verheye, Growth and Production of Rubber, in Land use, land cover and soil science, (Ed: W. Verheye), UNESCO-EOLSS Publishers, Oxford, UK 2010
3 T.R. Vijiyaram, A technical review on rubber, Int. J. Des. Manuf. Technol., 3 (2009) 1, 25-37, doi:10.18000/ijodam.70043
4 E. V. Klimentyev, A. O. Zvonov, E. U. Glazkova, Rubber-cord cushions application in modern engeineeging, 2014 Dynamics of Systems, Mechanism and Machines (Dynamics), Omsk-Russia, IEEE, 2014
5 T.S. Natarajan, S. Finger, J. Lacayo-Pineda, E.S. Bhagavatheswaran, S. S. Banerjee, G. Heinrich, A. Das, Robust Triboelectric Generators by All-In-One Commercial Rubbers, ACS Appl. Electron. Mater., 2 (2020) 12, 4054-4064, doi:10.1021/acsaelm.0c00846
6 S. Muroga, Y. Takahashi, Y. Hikima, S. Ata, S. G. Kazarian, M. Ohsima, T. Okazaki, K. Hata, Novel approaches to in-situ atr-ftir spectroscopy and spectroscopic imaging for real-time simultaneous monitoring curing reaction and diffusion of the curing agent at rubber nanocomposites surface, Polymers, 13 (2021) 17,2879, doi:10.3390/polym13172879
7 F. Z. S. A. Hassani, W. Ouarhin, M. E. Achaby, Y. Tamraoui, M. O. Bensalah, D. Rodrigue, R. Bouhfid, A. E. K. Qaiss, Recycled tires shreds based polyurethane binder: Production and characterization, Mech. Mater., 144 (2020), 103351, doi:10.1016/j.mechmat.2020.103351
8 G. Zanchin, G. Leona, Polyefilen thermoplastic elastomers from polymerization catalysis: Advantages, pitfalls and future challenges, Prog. Polym. Sci., 113 (2021), 101342, doi:10.1016/j.progpolymsci.2020.101342
9 J. B. Van Beilen, Y. Poirier, Guayule and Russian dandelion as alternative sources of natural rubber, Crit. Rev. Biotechnol., 27 (2007) 4, 217-231, doi:10.1080/07388550701775927
10 M. W. Sabaa, A. F. Younan, R. M. Mohsen, M. L. Tawfic, Maleic anhydride grafted rubbers for metallic surfaces lamination, J. Appl. Polym. Sci., 108 (2008) 2, 850-857, doi:10.1002/app.27699
11 S. R. Khimi, K. L. Pickering, A new method to predict optimum cure time of rubber compound using dynamic mechanical analysis, J. Appl. Polym. Sci., 131 (2014) 6, 40008, doi:10.1002/app.40008
12 Y. Heping, L. Sidong, P. Zheng, Preparation and study of epoxidized natural rubber, J. Therm. Anal. Calorim., 58 (1999) 2, 293-299, doi:10.1023/a:1010199013587
13 H. Mooibroek, K. Cornish, Alternative sources of natural rubber, Appl. Microbiol. Biotechnol., 53 (2000), 355-365, doi:10.1007/s002530051627
14 A. B. Nair, R. Joseph, Chemistry, manufacture and applications of natural rubber, (Eds: S. Kohjiya, Y. Ikeda), Woodhead Publishing, UK 2014, Ch. 9
15 E.E. Cömez, S. Öztürk, Etilen vinil asetat (EVA) ve etilen propilen dien (EPDM) karışımlarına eklenen huntit/hidromanyezit’in etkilerinin incelenmesi, JournalMM., 3 (2022) 1, 33-49, doi:10.55546/jmm.1013165
16 P. Rybinski, B. Syrek, A. Marzec, B. Szadkowski, M. Kusmierek, M. Sliwka-Kaszynska, U. Z. Mirkhodjaev, Effects of basalt and carbon fillers on fire hazard, thermal, and mechanical properties of EPDM rubber composites, Materials, 14 (2021) 18, 5245, doi:10.3390/ma14185245
17 S. Samaržija-Jovanović, V. Jovanović, G. Marković, S. Konstantinović, M. Marinović-Cincović, Nanocomposites based on silica-reinforced ethylene-propylene-diene-monomer/acrylonitrile-butadiene rubber blends, Compos. Part B Eng., 42 (2011) 5, 1244-1250, doi:10.1016/j.compositesb.2011.02.008
18 L. Rodrigues, I. M. Banat, J. Teixeira, R. Oliveira, Strategies for the prevention of microbial biofilm formation on silicone rubber voice prostheses, J. Biomed. Mater. Res., Part B, 81 (2007) 2, 358-370, doi:10.1002/jbm.b.30673
19 A. Fazli, D. Rodrigue, Waste Rubber Recycling: A Review on the evolution and properties of thermoplastic elastomers, Materials, 13 (2020) 3, 782, doi:10.3390/ma13030782
20 R. Anyszka, D. M. Bieliński, Z. Pędzich, P. Rybiński, M. Imiela, M. Siciński, M. Zarzecka-Napierała, T. Gozdek, P. Rutkowski, Thermal stability and flammability of styrene-butadiene rubber-based (SBR) ceramifiable composites, Materials, 9 (2016) 7, 604, doi:10.3390/ma9070604
21 K. Akshay, M. Arjun, S. S. Govind, V. Hrithwik, S. Akhil, N. Rahulan, Mechanical behavior of silicon carbide filled SBR/NBR blends, Mater. Today: Proc., 42 (2021), 1432-1436, doi:10.1016/j.matpr.2021.01.234
22 X. Zhang, Y. Zhang, Z. Peng, X. Shang, Y. Zhang, Dynamically vulcanized nitrile rubber/polyoxymethylene thermoplastic elastomers, J. Appl. Polym. Sci., 77 (2000) 12, 2641-2645, doi:10.1002/1097-4628(20000919)77:12<2641::AID-APP110>3.0.CO;2-0
23 E. E. Cömez, S. Öztürk, Farklı vulkanizasyon parametrelerinin karbon ve kaolen-silika esaslı karışımların çapraz bağ yoğunluğuna ve mekanik özelliklerine etkileri, ALKU Journal of Science, 4 (2022) 2, 53-62, doi:10.46740/alku.1127332
24 J. Wu, W. Xing, G. Huang, H. Li, M. Tang, S. Wu, Y. Liu, Vulcanization kinetics of graphene/natural rubber nanocomposites, Polymer, 54 (2013) 13, 3314-3323, doi:10.1016/j.polymer.2013.04.044
25 L. Chen, Z. Jia, Y. Tang, L. Wu, Y. Luo, D. Jia, Novel functional silica nanoparticles for rubber vulcanization and reinforcement, Compos. Sci. Technol., 144 (2017), 11-17, doi:10.1016/j.compscitech.2016.11.005
26 S. Mostoni, P. Milana, B. Di Credio, M. D’Arienzo, R. Scotti, Zinc-based curing activators: New trends for reducing zinc content in rubber vulcanization process, Catalysts, 9 (2019) 8, 664, doi:10.3390/catal9080664
27 N. A. Nikiforova, M. A. Sheryshev, Estimation of the adhesion strength of rubber-metal bonds, Polym. Sci., Ser. D, 5 (2012), 53-59, doi:10.1134/S199542121201011X
28 M. E. Mehr, H. Aghamohammadi, S. N. H. Abbandanak, G. R. Aghamirzadeh, R. Eslami-Farsani, S. M. H. Siadati, Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates, Int. J. Adhes. Adhes., 92 (2019), 133-141, doi:10.1016/j.ijadhadh.2019.04.015
29 L. Guo, J. Liu, H. Xia, X. Li, X. Zhang, H. Yang, Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints, Polym. Test., 94 (2021), 107063, doi:10.1016/j.polymertesting.2021.107063
30 P. Molitor, T. Young, Investigations into the use of excimer laser irradiation as a titanium alloy surface treatment in a metal to composite adhesive bond, Int. J. Adhes. Adhes., 24 (2004) 2, 127-134, doi:10.1016/j.ijadhadh.2003.06.001
31 T. Sekercioglu, Makine elemanları hesap şekillendirme, 5th ed., Birsen Yayınevi, Istanbul, Turkey 2021
32 S. Ebnesajjad, C. F. Ebnesajjad, Surface treatment of materials for adhesive bonding, 2nd ed., William Andrew, Oxford, UK 2014.
33 P. Sasidharan Achary, C. Gouri, R. Ramaswamy, Reactive bonding of natural rubber to metal by a nitrile-phenolic adhesive, J. Appl. Polym. Sci., 81 (2001) 11, 2597-2608, doi:10.1002/app.1702
34 B. Crowther, The handbook of rubber bonding, iSmithers Rapra Publishing, Shawbury, UK 2003
35 M. A. Ansarifar, J. Zhang, A. Bell, R. J. Ellis, Role of primer in rubber to Nylon 6,6 bonding, Int. J. Adhes. Adhes., 22 (2002) 3, 245-255, doi:10.1016/S0143-7496(01)00060-4
36 I. Rezaeian, P. Zahedi, A. Rezaeian, Rubber adhesion to different substrates and its importance in industrial applications: A review, J. Adhes. Sci. Technol., 26 (2012) 6, 721-744, doi:10.1163/016942411X579975
37 M. A. Ansarifar, G. J. Lake, On the mechanics of rubber-to-metal bond failure, J. Adhes., 53 (1995) 3-4, 183-199, doi:10.1080/00218469508009938
38 J. Lasprilla-Botero, M. Álvarez-Láinez, D. A. Acosta, J. M. Martı́n-Martı́nez, Water-based adhesive formulations for rubber to metal bonding developed by statistical design of experiments, Int. J. Adhes. Adhes., 73 (2017), 58-65, doi:10.1016/j.ijadhadh.2016.11.007
39 A. K. Bhowmick, M. M. Hall, H. A. Benary, Rubber products manufacturing technology, Marcel Dekker, New York, USA 1994
40 C. Chandrasekaran, Anticorrosive rubber lining: A practical guide for plastic engineers, William Adrew, Oxford, UK 2017
41 A. Durmuş, S. Ülkü, M. Güden, Ö. F. Otnar, Kauçuk/metal yapışma mukavemetinin belirlenmesi, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 10 (2005) 1, 33-39.
42 J. M. Buist, W. J. S. Naunton, Rubber bonding, Rubber Chem. Technol., 23 (1950) 4, 945-971, doi:10.5254/1.3547099
43 L. F. M. Da Silva, A. Öchsner, R. D. Adams, Handbook of adhesion technology, Springer, Heidelberg, Germany 2011
44 C. S. S. R. Kumar, A. M. Nijasure, Vulcanization of rubber, Resonance, 4 (1997), 55-59, doi:10.1007/BF02919629
45 Ö. Kılınç, N. Toplan, Amorf Polimerler, ALKU J. Sci., 5 (2023) 3, 131-148, doi:10.46740/alku.1299835
46 A. K. Bhowmick, R. Mukhopadhyay, S. K. De, High temperature vulcanization of elastomers, Rubber Chem. Technol., 52 (1979) 4, 725-734, doi:10.5254/1.3535236
47 M. A. Akiba, A. S. Hashim, Vulcanization and crosslinking in elastomers, Prog. Polym. Sci., 22 (1997) 3, 475-521, doi:10.1016/S0079-6700(96)00015-9
48 N. J. Morrison, M. Porter, Temperature effects on the stability of intermediates and crosslinks in sulfur vulcanization, Rubber Chem. Technol., 57 (1984) 1, 63-85, doi:10.5254/1.3536002
49 A. Y. Coran, in The science and technology of rubber, (eds: B. Erman, J. E. Mark, C. M. Roland), Academic Press,USA 2013, Ch. 7.
50 J. Kruželák, M. Mikolajová, A. Kvasničáková, M. Džuganová, I. Chodák, J. Hronkovič, J. Pret’o, I. Hudec, Combined sulphur and peroxide vulcanization of filled and unfilled epdm-based rubber compound, Materials, 16 (2023) 16, 5596, doi:10.3390/ma16165596
51 R. Ding, A. I. Leonov, A kinetic model for sulfur accelerated vulcanization of a natural rubber compound, J. Appl. Polym. Sci., 61 (1996) 3, 455-463, doi:10.1002/(SICI)1097-4628(19960718)61:3<455::AID-APP8>3.0.CO;2-H
52 ASTM D2084-19A:2019 - Standard test method for rubber property—Vulcanization using oscillating disk cure meter ASTM International, West Conshohocken, PA, doi:10.1520/D2084-19A
53 S. Erkek, Karbon siyahı/yağ ve karbon siyahı/dolgu maddesi oranının farklı vulkanizasyon sistemlerinde EPDM, NBR ve SBR elastomerlerinin fiziko-mekaniksel özellikleri üzerine etkisi, Master’s Thesis, Cukurova University, Adana, Turkey, 2007
54 ISO 6502-1:2018 - Rubber – Measurement of vulcanization characteristics using curemeters- Part 1: Introduction ISO Committee, Geneve
55 ASTM D1566-21a:2021 - Standard terminology relating to rubber, ASTM International, West Conshohocken, PA, doi:10.1520/D1566-21A
56 ASTM D6085-97R22:2022 - Standard practice for sampling in rubber testing—Terminology and basic concepts ASTM International, West Conshohocken, PA, doi:10.1520/D6085-97R22
57 ISO 5893:2019 - Rubber and plastics test equipment – Tensile, flexural and compression (Constant rate of traverse) – Specification ISO Committee, Geneve
58 ASTM E4-21:2021 - Standard practices for force calibration and verification of testing machines ASTM International, West Conshohocken, PA, doi:10.1520/E0004-21
59 ISO 6502-2:2018- Rubber – Measurement of vulcanization characteristics using curemeters- Part 2: Oscillating disc curemeter ISO Committee, Geneve
60 ISO 6502-3:2023 - Rubber – Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter ISO Committee, Geneve
61 ASTM D5289-19A:2019 - Standard test method for rubber property – Vulcanization using rotorless cure meters ASTM International, West Conshohocken, PA, doi:10.1520/D5289-19A
62 ASTM D413-98R17:2017 - Standard test methods for rubber property – Adhesion to flexible substrate ASTM International, West Conshohocken, PA, doi:10.1520/D0413-98R17
63 ASTM D429-14R23:2023 - Standard test methods for rubber property – Adhesion to rigid substrates ASTM International, West Conshohocken, PA, doi:10.1520/D0429-14R23
64 ISO 813:2019 - Rubber, vulcanized or thermoplastic – Determination of adhesion to a rigid substrate - 90 degree peel method ISO Committee, Geneve
65 ISO 814:2017 - Rubber, vulcanized or thermoplastic – Determination of adhesion to metal – Two-plate method ISO Committee, Geneve
66 ISO 5600:2024 - Rubber – Determination of adhesion to rigid materials using conical shaped parts ISO Committee, Geneve
67 ISO 1827:2022 - Rubber, Vulcanized or thermoplastic – Determination of shear modulus and adhesion to rigid plates – Quadruple - Shear methods ISO Committee, Geneve
68 ISO 5603:2024 - Rubber, vulcanized – Determination of adhesion to wire cord ISO Committee, Geneve
69 ISO 6133:2015 - Rubber and plastics – Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength ISO Committee, Geneve
70 I. Ismail, M. K. Harun, Adhesion failure of rubber/metal composites undergoing corrosion, Rubber Chem. Technol., 90 (2017) 3, 455-466, doi:10.5254/rct.16.83764
71 A. R. Madura, Investigation of rubber/metal bond failures by surface-analyses techniques, Rubber Chem. Technol., 64 (1991) 2, 243-253, doi:10.5254/1.3538556
72 I. Ismail, M. K. Harun, Evaluation of rubber/mild steel bonds failure after exposure in marine environment, Int. J. Chem. Eng. Appl., 4 (2013) 3, 119-123, doi:10.7763/IJCEA.2013.V4.276
73 P. Kulkarni, S. Kshire, S. Patil, S. Vishwakarma, Design and manufacturing of rubber-metal bond testing machine for silent bush block, Int. J. Eng. Res. Technol., 3 (2014) 9, 787-790, doi:10.17577/IJERTV3IS090725
74 D. C. Leicht, O. H. Yeoh, A. N. Gent, J. Padovan, R. L. Mullen, Adhesion failure in bonded rubber cylinders Part 1: Internal penny-shaped cracks, Rubber Chem. Technol., 76 (2003) 1, 160-173, doi:10.5254/1.3547731
75 C. C. Lawrence, G. J. Lake, A. G. Thomas, New techniques for measurement of rubber-to-metal bond failure, Rubber Chem. Technol., 78 (2005) 2, 271-285, doi:10.5254/1.3547883
76 J. R. Beatty, E. C. Dalglish, A new tester for dynamic rubber-to-metal adhesion, Rubber Chem. Technol., 47 (1974) 1, 188-201, doi:10.5254/1.3540424
77 M. Nakache, E. Aragon, L. Belec, F. X. Perrin, G. Roux, P. Y. Gac, Degradation of rubber to metal bonds during its cathodic delamination, validation of an artificial ageing test, Prog. Org. Coat., 72 (2011) 3, 279-286, doi:10.1016/j.porgcoat.2011.04.016
78 I. Ismail, M. K. Harun, M. Z. A. Yahya, Effects of dissolved oxygen on the integrity of industrial chlorinated rubber-based primer used in rubber/metal composites, Rubber Chem. Technol., 88 (2015) 3, 502-514, doi:10.5254/rct.15.84905
79 Z. Wang, Research on fatigue failure mode and failure theory of rubber, J. Phys.: Conf. Ser., 2076 (2021), 1-9, doi:10.1088/1742-6596/2076/1/012079
80 R. Y. Ting, in Adhesive joints: Formation, characteristics, and testing, (Ed: K. L. Mittal), Plenum Press, New York and London 1984
81 F. Björk, B. Stenberg, Endurance of rubber-to-metal joints in hot water: comparison between two different stripping test methods, Polym. Test., 6 (1986) 5, 369-377, doi:10.1016/0142-9418(86)90042-5
82 E. Östman, S. Persson, On the effect of metal surface texture on long-term resistance of vulcanized rubber-to-metal bonds under accelerated ageing, Int. J. Adhes. Adhes., 10 (1990) 2, 102-107, doi:10.1016/0143-7496(90)90150-V
83 Ş. Aktepe, Kauçuk-Metal yapıştırılması, Master’s Thesis, Yildiz Technical University, İstanbul, Turkey, 1992
84 M. S. Boulos, M. Petschel, Coating for rubber bonding and paint adhesion, J. Mater. Eng. Perform., 6 (1997) 4, 421-425, doi:10.1007/s11665-997-0111-3
85 J. W. Cook, S. Edge, D. E. Packham, Bonding of natural rubber to steel: surface roughness and interlayer structure, J. Adhes., 72 (2000) 3-4, 293-315, doi:10.1080/00218460008029287
86 M. A. Ansarifar, J. Zhang, J. Baker, A. Bell, R. J. Ellis, Bonding properties of rubber to steel, aluminium and nylon 6,6, Int. J. Adhes. Adhes., 21 (2001) 5, 369-380, doi:10.1016/S0143-7496(01)00014-8
87 G. S. Jeon, G. Seo, Influence of cure conditions on the adhesion of rubber compound to brass-plated steel cord. Part I. Cure temperature, J. Adhes., 76 (2001) 3, 201-221, doi:10.1080/00218460108029626
88 G. S. Jeon, G. Seo, Influence of cure conditions on the adhesion of rubber compound to brass-plated steel cord. Part II. Cure time, J. Adhes., 76 (2001) 3, 223-244, doi:10.1080/00218460108029627
89 S. G. Jeon, G. Seo, Effect of cure levels on adhesion between rubber and brass in the composites made up of rubber compound and brass-plated steel cord, Korean J. Chem. Eng., 20 (2003), 496-502, doi:10.1007/BF02705555
90 J. L. Delattre, R. d’Agostino, F. Fracassi, Plasma-polymerized thiophene films for enhanced rubber-steel bonding, Appl. Surf. Sci., 252 (2006) 10, 3912-3919, doi:10.1016/j.apsusc.2005.05.069
91 O. H. Yeoh, Some geometric considerations for rubber-metal bond test specimens, Rubber Chem. Technol., 79 (2006) 2, 320-337, doi:10.5254/1.3547940
92 R. J. Del Vecchio, Jr. Ernest Ferro, Strength vs. durability of rubber-metal bonds factor effects from processing and chemistry, Rubber World, 237 (2008) 4, 37–41.
93 X. F. Zhang, L. Fan, X. H. Zhao, L. Q. Zhang, L. Liu, Y. Zuo, Bonding properties between nitrile-butadiene rubber and aluminum alloy treated by anodizing methods, J. Appl. Polym. Sci., 112 (2008) 1, 283-289, doi:10.1002/app.29378
94 F. Wang, Y. Li, D. Wang, Adhesion enhancement for liquid silicone rubber and different surface by organosilane and Pt catalyst at room temperature, Bull. Mater. Sci., 36 (2013), 1013-1017, doi:10.1007/s12034-013-0575-8
95 A. Latifi, M. Imani, M. T. Khorasani, M. D. Joupari, Plasma surface oxidation of 316L stainless steel for improving adhesion strength of silicon rubber coating to metal substrate, Appl. Surf. Sci., 320 (2014), 471-481, doi:10.1016/j.apsusc.2014.09.084
96 T. Renner, Improvement in production of rubber-metal parts for the automotive industry, Int. Polym. Sci. Technol., 41 (2014) 2, 779-784,
doi:10.1177/0307174X1404100201
97 A. Souid, A. Sarda, R. Deterre, E. Leroy, Influence of reversion on adhesion in the rubber-to-metal vulcanization-bonding process, Polym. Test., 41 (2015), 157-162, doi:10.1016/j.polymertesting.2014.11.007
98 C. Vandenabeele, S. Bulou, R. Maurau, F. Siffer, T. Belmonte, P. Choquet, Organo-chlorinated thin films deposited by atmospheric pressure plasma-enhanced chemical vapor deposition for adhesion enhancement between rubber and zinc-plated steel monofilaments, ACS Appl. Mater. Interfaces, 7 (2015) 26, 14317-14327, doi:10.1021/acsami.5b02887
99 D. Pradhan, R. Ghosh, A. Banerjee, M. Dutta, Effect of electro-cleaning roughness on steel wire-rubber adhesion strength, Surf. Coat. Technol., 286 (2016), 293-302, doi:10.1016/j.surfcoat.2015.12.048
100 C. Günsoy, Mekanik ve kimyasal yüzey işlemlerinin poliakrilik kauçuk ve EN10130 DC01 çeliği yapışmasına etkilerinin incelenmesi, Master’s Thesis, Kocaeli University, Kocaeli, Turkey, 2018
101 F. Mıhçı, Improvement of Metal-EPDM rubber adhesion by plasma surface modification, Master’s Thesis, Sakarya University, Sakarya, Turkey, 2018
102 Q. Ahsan, A. F. A. Mawardi, S. Subramonian, M. R. Alkahari, A. Putra, (eds: M. N. O. Zahid, R. A. Aziz, A. R. Yusoff, N. M. Yahya, F. A. Aziz, M. Y. Abu), in IMEC- APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and the 5th Asia Pacific Conference on manufacturing systems, Springer, Singapore 2020, Doi:10.1007/978-981-15-0950-6
103 N. Gong, B. Wang, Y. Wang, X. Li, W. Lin, S. Fu, X. Chu, Effect of metal surface state on injection joining strength of aluminum-rubber composite part, J. Manuf. Process, 49 (2020), 365-372, doi:10.1016/j.jmapro.2019.12.006
104 A. Grard, L. Belec, F. X. Perrin, Effect of surface morphology on the adhesion of silicon elastomers on AA6061 aluminum alloy, Int. J. Adhes. Adhes., 102 (2020), 102656, doi:10.1016/j.ijadhadh.2020.102656
105 E. Sarlin, A. Rosling, M. Honkanen, M. Lindgren, M. Juutilainen, M. Poikelispää, P. Laihonen, M. Vippola, J. Vuorinen, Effect of environment on bromobutyl rubber-steel adhesion, Rubber Chem. Technol., 93 (2020) 2, 429-444, doi:10.5254/rct.19.80455
106 E. Sarlin, M. Honkanen, M. Lindgren, P. Laihonen, M. Juutilainen, M. Vippola, J. Vuorinen, The effect of substrate pre-treatment on durability of rubber-stainless steel adhesion, Surf. Interfaces, 21 (2020), 100646, doi:10.1016/j.surfin.2020.100646
107 R. H. Abdullah, A. F. Essa, Measuring the peeling strength between polymers (low density polyethylene, ethylene propylene diene monomer (EPDM) rubber) and brass and evaluating the effect of thermal and chemical oxidation on the metal, Mater. Today: Proc., 47 (2021), 5992-5998, doi:10.1016/j.matpr.2021.04.547
108 L. N. Andreikova, Y. O. Andriasyan, I. I. Abol’skaya, Simulation of the durability of adhesive joints during operation of rubber-metallic products, Polym. Sci., Ser. D, 15 (2022) 4, 586-589, doi:10.1134/S1995421222040335
109 S. V. Kuteneva, S. V. Gladkovsky, D. I. Vichuzhanin, P. D. Nedzvetsky, Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading, Compos. Struct., 285 (2022), 115078, doi:10.1016/j.compstruct.2021.115078
2 W. Verheye, Growth and Production of Rubber, in Land use, land cover and soil science, (Ed: W. Verheye), UNESCO-EOLSS Publishers, Oxford, UK 2010
3 T.R. Vijiyaram, A technical review on rubber, Int. J. Des. Manuf. Technol., 3 (2009) 1, 25-37, doi:10.18000/ijodam.70043
4 E. V. Klimentyev, A. O. Zvonov, E. U. Glazkova, Rubber-cord cushions application in modern engeineeging, 2014 Dynamics of Systems, Mechanism and Machines (Dynamics), Omsk-Russia, IEEE, 2014
5 T.S. Natarajan, S. Finger, J. Lacayo-Pineda, E.S. Bhagavatheswaran, S. S. Banerjee, G. Heinrich, A. Das, Robust Triboelectric Generators by All-In-One Commercial Rubbers, ACS Appl. Electron. Mater., 2 (2020) 12, 4054-4064, doi:10.1021/acsaelm.0c00846
6 S. Muroga, Y. Takahashi, Y. Hikima, S. Ata, S. G. Kazarian, M. Ohsima, T. Okazaki, K. Hata, Novel approaches to in-situ atr-ftir spectroscopy and spectroscopic imaging for real-time simultaneous monitoring curing reaction and diffusion of the curing agent at rubber nanocomposites surface, Polymers, 13 (2021) 17,2879, doi:10.3390/polym13172879
7 F. Z. S. A. Hassani, W. Ouarhin, M. E. Achaby, Y. Tamraoui, M. O. Bensalah, D. Rodrigue, R. Bouhfid, A. E. K. Qaiss, Recycled tires shreds based polyurethane binder: Production and characterization, Mech. Mater., 144 (2020), 103351, doi:10.1016/j.mechmat.2020.103351
8 G. Zanchin, G. Leona, Polyefilen thermoplastic elastomers from polymerization catalysis: Advantages, pitfalls and future challenges, Prog. Polym. Sci., 113 (2021), 101342, doi:10.1016/j.progpolymsci.2020.101342
9 J. B. Van Beilen, Y. Poirier, Guayule and Russian dandelion as alternative sources of natural rubber, Crit. Rev. Biotechnol., 27 (2007) 4, 217-231, doi:10.1080/07388550701775927
10 M. W. Sabaa, A. F. Younan, R. M. Mohsen, M. L. Tawfic, Maleic anhydride grafted rubbers for metallic surfaces lamination, J. Appl. Polym. Sci., 108 (2008) 2, 850-857, doi:10.1002/app.27699
11 S. R. Khimi, K. L. Pickering, A new method to predict optimum cure time of rubber compound using dynamic mechanical analysis, J. Appl. Polym. Sci., 131 (2014) 6, 40008, doi:10.1002/app.40008
12 Y. Heping, L. Sidong, P. Zheng, Preparation and study of epoxidized natural rubber, J. Therm. Anal. Calorim., 58 (1999) 2, 293-299, doi:10.1023/a:1010199013587
13 H. Mooibroek, K. Cornish, Alternative sources of natural rubber, Appl. Microbiol. Biotechnol., 53 (2000), 355-365, doi:10.1007/s002530051627
14 A. B. Nair, R. Joseph, Chemistry, manufacture and applications of natural rubber, (Eds: S. Kohjiya, Y. Ikeda), Woodhead Publishing, UK 2014, Ch. 9
15 E.E. Cömez, S. Öztürk, Etilen vinil asetat (EVA) ve etilen propilen dien (EPDM) karışımlarına eklenen huntit/hidromanyezit’in etkilerinin incelenmesi, JournalMM., 3 (2022) 1, 33-49, doi:10.55546/jmm.1013165
16 P. Rybinski, B. Syrek, A. Marzec, B. Szadkowski, M. Kusmierek, M. Sliwka-Kaszynska, U. Z. Mirkhodjaev, Effects of basalt and carbon fillers on fire hazard, thermal, and mechanical properties of EPDM rubber composites, Materials, 14 (2021) 18, 5245, doi:10.3390/ma14185245
17 S. Samaržija-Jovanović, V. Jovanović, G. Marković, S. Konstantinović, M. Marinović-Cincović, Nanocomposites based on silica-reinforced ethylene-propylene-diene-monomer/acrylonitrile-butadiene rubber blends, Compos. Part B Eng., 42 (2011) 5, 1244-1250, doi:10.1016/j.compositesb.2011.02.008
18 L. Rodrigues, I. M. Banat, J. Teixeira, R. Oliveira, Strategies for the prevention of microbial biofilm formation on silicone rubber voice prostheses, J. Biomed. Mater. Res., Part B, 81 (2007) 2, 358-370, doi:10.1002/jbm.b.30673
19 A. Fazli, D. Rodrigue, Waste Rubber Recycling: A Review on the evolution and properties of thermoplastic elastomers, Materials, 13 (2020) 3, 782, doi:10.3390/ma13030782
20 R. Anyszka, D. M. Bieliński, Z. Pędzich, P. Rybiński, M. Imiela, M. Siciński, M. Zarzecka-Napierała, T. Gozdek, P. Rutkowski, Thermal stability and flammability of styrene-butadiene rubber-based (SBR) ceramifiable composites, Materials, 9 (2016) 7, 604, doi:10.3390/ma9070604
21 K. Akshay, M. Arjun, S. S. Govind, V. Hrithwik, S. Akhil, N. Rahulan, Mechanical behavior of silicon carbide filled SBR/NBR blends, Mater. Today: Proc., 42 (2021), 1432-1436, doi:10.1016/j.matpr.2021.01.234
22 X. Zhang, Y. Zhang, Z. Peng, X. Shang, Y. Zhang, Dynamically vulcanized nitrile rubber/polyoxymethylene thermoplastic elastomers, J. Appl. Polym. Sci., 77 (2000) 12, 2641-2645, doi:10.1002/1097-4628(20000919)77:12<2641::AID-APP110>3.0.CO;2-0
23 E. E. Cömez, S. Öztürk, Farklı vulkanizasyon parametrelerinin karbon ve kaolen-silika esaslı karışımların çapraz bağ yoğunluğuna ve mekanik özelliklerine etkileri, ALKU Journal of Science, 4 (2022) 2, 53-62, doi:10.46740/alku.1127332
24 J. Wu, W. Xing, G. Huang, H. Li, M. Tang, S. Wu, Y. Liu, Vulcanization kinetics of graphene/natural rubber nanocomposites, Polymer, 54 (2013) 13, 3314-3323, doi:10.1016/j.polymer.2013.04.044
25 L. Chen, Z. Jia, Y. Tang, L. Wu, Y. Luo, D. Jia, Novel functional silica nanoparticles for rubber vulcanization and reinforcement, Compos. Sci. Technol., 144 (2017), 11-17, doi:10.1016/j.compscitech.2016.11.005
26 S. Mostoni, P. Milana, B. Di Credio, M. D’Arienzo, R. Scotti, Zinc-based curing activators: New trends for reducing zinc content in rubber vulcanization process, Catalysts, 9 (2019) 8, 664, doi:10.3390/catal9080664
27 N. A. Nikiforova, M. A. Sheryshev, Estimation of the adhesion strength of rubber-metal bonds, Polym. Sci., Ser. D, 5 (2012), 53-59, doi:10.1134/S199542121201011X
28 M. E. Mehr, H. Aghamohammadi, S. N. H. Abbandanak, G. R. Aghamirzadeh, R. Eslami-Farsani, S. M. H. Siadati, Effects of applying a combination of surface treatments on the mechanical behavior of basalt fiber metal laminates, Int. J. Adhes. Adhes., 92 (2019), 133-141, doi:10.1016/j.ijadhadh.2019.04.015
29 L. Guo, J. Liu, H. Xia, X. Li, X. Zhang, H. Yang, Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints, Polym. Test., 94 (2021), 107063, doi:10.1016/j.polymertesting.2021.107063
30 P. Molitor, T. Young, Investigations into the use of excimer laser irradiation as a titanium alloy surface treatment in a metal to composite adhesive bond, Int. J. Adhes. Adhes., 24 (2004) 2, 127-134, doi:10.1016/j.ijadhadh.2003.06.001
31 T. Sekercioglu, Makine elemanları hesap şekillendirme, 5th ed., Birsen Yayınevi, Istanbul, Turkey 2021
32 S. Ebnesajjad, C. F. Ebnesajjad, Surface treatment of materials for adhesive bonding, 2nd ed., William Andrew, Oxford, UK 2014.
33 P. Sasidharan Achary, C. Gouri, R. Ramaswamy, Reactive bonding of natural rubber to metal by a nitrile-phenolic adhesive, J. Appl. Polym. Sci., 81 (2001) 11, 2597-2608, doi:10.1002/app.1702
34 B. Crowther, The handbook of rubber bonding, iSmithers Rapra Publishing, Shawbury, UK 2003
35 M. A. Ansarifar, J. Zhang, A. Bell, R. J. Ellis, Role of primer in rubber to Nylon 6,6 bonding, Int. J. Adhes. Adhes., 22 (2002) 3, 245-255, doi:10.1016/S0143-7496(01)00060-4
36 I. Rezaeian, P. Zahedi, A. Rezaeian, Rubber adhesion to different substrates and its importance in industrial applications: A review, J. Adhes. Sci. Technol., 26 (2012) 6, 721-744, doi:10.1163/016942411X579975
37 M. A. Ansarifar, G. J. Lake, On the mechanics of rubber-to-metal bond failure, J. Adhes., 53 (1995) 3-4, 183-199, doi:10.1080/00218469508009938
38 J. Lasprilla-Botero, M. Álvarez-Láinez, D. A. Acosta, J. M. Martı́n-Martı́nez, Water-based adhesive formulations for rubber to metal bonding developed by statistical design of experiments, Int. J. Adhes. Adhes., 73 (2017), 58-65, doi:10.1016/j.ijadhadh.2016.11.007
39 A. K. Bhowmick, M. M. Hall, H. A. Benary, Rubber products manufacturing technology, Marcel Dekker, New York, USA 1994
40 C. Chandrasekaran, Anticorrosive rubber lining: A practical guide for plastic engineers, William Adrew, Oxford, UK 2017
41 A. Durmuş, S. Ülkü, M. Güden, Ö. F. Otnar, Kauçuk/metal yapışma mukavemetinin belirlenmesi, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 10 (2005) 1, 33-39.
42 J. M. Buist, W. J. S. Naunton, Rubber bonding, Rubber Chem. Technol., 23 (1950) 4, 945-971, doi:10.5254/1.3547099
43 L. F. M. Da Silva, A. Öchsner, R. D. Adams, Handbook of adhesion technology, Springer, Heidelberg, Germany 2011
44 C. S. S. R. Kumar, A. M. Nijasure, Vulcanization of rubber, Resonance, 4 (1997), 55-59, doi:10.1007/BF02919629
45 Ö. Kılınç, N. Toplan, Amorf Polimerler, ALKU J. Sci., 5 (2023) 3, 131-148, doi:10.46740/alku.1299835
46 A. K. Bhowmick, R. Mukhopadhyay, S. K. De, High temperature vulcanization of elastomers, Rubber Chem. Technol., 52 (1979) 4, 725-734, doi:10.5254/1.3535236
47 M. A. Akiba, A. S. Hashim, Vulcanization and crosslinking in elastomers, Prog. Polym. Sci., 22 (1997) 3, 475-521, doi:10.1016/S0079-6700(96)00015-9
48 N. J. Morrison, M. Porter, Temperature effects on the stability of intermediates and crosslinks in sulfur vulcanization, Rubber Chem. Technol., 57 (1984) 1, 63-85, doi:10.5254/1.3536002
49 A. Y. Coran, in The science and technology of rubber, (eds: B. Erman, J. E. Mark, C. M. Roland), Academic Press,USA 2013, Ch. 7.
50 J. Kruželák, M. Mikolajová, A. Kvasničáková, M. Džuganová, I. Chodák, J. Hronkovič, J. Pret’o, I. Hudec, Combined sulphur and peroxide vulcanization of filled and unfilled epdm-based rubber compound, Materials, 16 (2023) 16, 5596, doi:10.3390/ma16165596
51 R. Ding, A. I. Leonov, A kinetic model for sulfur accelerated vulcanization of a natural rubber compound, J. Appl. Polym. Sci., 61 (1996) 3, 455-463, doi:10.1002/(SICI)1097-4628(19960718)61:3<455::AID-APP8>3.0.CO;2-H
52 ASTM D2084-19A:2019 - Standard test method for rubber property—Vulcanization using oscillating disk cure meter ASTM International, West Conshohocken, PA, doi:10.1520/D2084-19A
53 S. Erkek, Karbon siyahı/yağ ve karbon siyahı/dolgu maddesi oranının farklı vulkanizasyon sistemlerinde EPDM, NBR ve SBR elastomerlerinin fiziko-mekaniksel özellikleri üzerine etkisi, Master’s Thesis, Cukurova University, Adana, Turkey, 2007
54 ISO 6502-1:2018 - Rubber – Measurement of vulcanization characteristics using curemeters- Part 1: Introduction ISO Committee, Geneve
55 ASTM D1566-21a:2021 - Standard terminology relating to rubber, ASTM International, West Conshohocken, PA, doi:10.1520/D1566-21A
56 ASTM D6085-97R22:2022 - Standard practice for sampling in rubber testing—Terminology and basic concepts ASTM International, West Conshohocken, PA, doi:10.1520/D6085-97R22
57 ISO 5893:2019 - Rubber and plastics test equipment – Tensile, flexural and compression (Constant rate of traverse) – Specification ISO Committee, Geneve
58 ASTM E4-21:2021 - Standard practices for force calibration and verification of testing machines ASTM International, West Conshohocken, PA, doi:10.1520/E0004-21
59 ISO 6502-2:2018- Rubber – Measurement of vulcanization characteristics using curemeters- Part 2: Oscillating disc curemeter ISO Committee, Geneve
60 ISO 6502-3:2023 - Rubber – Measurement of vulcanization characteristics using curemeters - Part 3: Rotorless curemeter ISO Committee, Geneve
61 ASTM D5289-19A:2019 - Standard test method for rubber property – Vulcanization using rotorless cure meters ASTM International, West Conshohocken, PA, doi:10.1520/D5289-19A
62 ASTM D413-98R17:2017 - Standard test methods for rubber property – Adhesion to flexible substrate ASTM International, West Conshohocken, PA, doi:10.1520/D0413-98R17
63 ASTM D429-14R23:2023 - Standard test methods for rubber property – Adhesion to rigid substrates ASTM International, West Conshohocken, PA, doi:10.1520/D0429-14R23
64 ISO 813:2019 - Rubber, vulcanized or thermoplastic – Determination of adhesion to a rigid substrate - 90 degree peel method ISO Committee, Geneve
65 ISO 814:2017 - Rubber, vulcanized or thermoplastic – Determination of adhesion to metal – Two-plate method ISO Committee, Geneve
66 ISO 5600:2024 - Rubber – Determination of adhesion to rigid materials using conical shaped parts ISO Committee, Geneve
67 ISO 1827:2022 - Rubber, Vulcanized or thermoplastic – Determination of shear modulus and adhesion to rigid plates – Quadruple - Shear methods ISO Committee, Geneve
68 ISO 5603:2024 - Rubber, vulcanized – Determination of adhesion to wire cord ISO Committee, Geneve
69 ISO 6133:2015 - Rubber and plastics – Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength ISO Committee, Geneve
70 I. Ismail, M. K. Harun, Adhesion failure of rubber/metal composites undergoing corrosion, Rubber Chem. Technol., 90 (2017) 3, 455-466, doi:10.5254/rct.16.83764
71 A. R. Madura, Investigation of rubber/metal bond failures by surface-analyses techniques, Rubber Chem. Technol., 64 (1991) 2, 243-253, doi:10.5254/1.3538556
72 I. Ismail, M. K. Harun, Evaluation of rubber/mild steel bonds failure after exposure in marine environment, Int. J. Chem. Eng. Appl., 4 (2013) 3, 119-123, doi:10.7763/IJCEA.2013.V4.276
73 P. Kulkarni, S. Kshire, S. Patil, S. Vishwakarma, Design and manufacturing of rubber-metal bond testing machine for silent bush block, Int. J. Eng. Res. Technol., 3 (2014) 9, 787-790, doi:10.17577/IJERTV3IS090725
74 D. C. Leicht, O. H. Yeoh, A. N. Gent, J. Padovan, R. L. Mullen, Adhesion failure in bonded rubber cylinders Part 1: Internal penny-shaped cracks, Rubber Chem. Technol., 76 (2003) 1, 160-173, doi:10.5254/1.3547731
75 C. C. Lawrence, G. J. Lake, A. G. Thomas, New techniques for measurement of rubber-to-metal bond failure, Rubber Chem. Technol., 78 (2005) 2, 271-285, doi:10.5254/1.3547883
76 J. R. Beatty, E. C. Dalglish, A new tester for dynamic rubber-to-metal adhesion, Rubber Chem. Technol., 47 (1974) 1, 188-201, doi:10.5254/1.3540424
77 M. Nakache, E. Aragon, L. Belec, F. X. Perrin, G. Roux, P. Y. Gac, Degradation of rubber to metal bonds during its cathodic delamination, validation of an artificial ageing test, Prog. Org. Coat., 72 (2011) 3, 279-286, doi:10.1016/j.porgcoat.2011.04.016
78 I. Ismail, M. K. Harun, M. Z. A. Yahya, Effects of dissolved oxygen on the integrity of industrial chlorinated rubber-based primer used in rubber/metal composites, Rubber Chem. Technol., 88 (2015) 3, 502-514, doi:10.5254/rct.15.84905
79 Z. Wang, Research on fatigue failure mode and failure theory of rubber, J. Phys.: Conf. Ser., 2076 (2021), 1-9, doi:10.1088/1742-6596/2076/1/012079
80 R. Y. Ting, in Adhesive joints: Formation, characteristics, and testing, (Ed: K. L. Mittal), Plenum Press, New York and London 1984
81 F. Björk, B. Stenberg, Endurance of rubber-to-metal joints in hot water: comparison between two different stripping test methods, Polym. Test., 6 (1986) 5, 369-377, doi:10.1016/0142-9418(86)90042-5
82 E. Östman, S. Persson, On the effect of metal surface texture on long-term resistance of vulcanized rubber-to-metal bonds under accelerated ageing, Int. J. Adhes. Adhes., 10 (1990) 2, 102-107, doi:10.1016/0143-7496(90)90150-V
83 Ş. Aktepe, Kauçuk-Metal yapıştırılması, Master’s Thesis, Yildiz Technical University, İstanbul, Turkey, 1992
84 M. S. Boulos, M. Petschel, Coating for rubber bonding and paint adhesion, J. Mater. Eng. Perform., 6 (1997) 4, 421-425, doi:10.1007/s11665-997-0111-3
85 J. W. Cook, S. Edge, D. E. Packham, Bonding of natural rubber to steel: surface roughness and interlayer structure, J. Adhes., 72 (2000) 3-4, 293-315, doi:10.1080/00218460008029287
86 M. A. Ansarifar, J. Zhang, J. Baker, A. Bell, R. J. Ellis, Bonding properties of rubber to steel, aluminium and nylon 6,6, Int. J. Adhes. Adhes., 21 (2001) 5, 369-380, doi:10.1016/S0143-7496(01)00014-8
87 G. S. Jeon, G. Seo, Influence of cure conditions on the adhesion of rubber compound to brass-plated steel cord. Part I. Cure temperature, J. Adhes., 76 (2001) 3, 201-221, doi:10.1080/00218460108029626
88 G. S. Jeon, G. Seo, Influence of cure conditions on the adhesion of rubber compound to brass-plated steel cord. Part II. Cure time, J. Adhes., 76 (2001) 3, 223-244, doi:10.1080/00218460108029627
89 S. G. Jeon, G. Seo, Effect of cure levels on adhesion between rubber and brass in the composites made up of rubber compound and brass-plated steel cord, Korean J. Chem. Eng., 20 (2003), 496-502, doi:10.1007/BF02705555
90 J. L. Delattre, R. d’Agostino, F. Fracassi, Plasma-polymerized thiophene films for enhanced rubber-steel bonding, Appl. Surf. Sci., 252 (2006) 10, 3912-3919, doi:10.1016/j.apsusc.2005.05.069
91 O. H. Yeoh, Some geometric considerations for rubber-metal bond test specimens, Rubber Chem. Technol., 79 (2006) 2, 320-337, doi:10.5254/1.3547940
92 R. J. Del Vecchio, Jr. Ernest Ferro, Strength vs. durability of rubber-metal bonds factor effects from processing and chemistry, Rubber World, 237 (2008) 4, 37–41.
93 X. F. Zhang, L. Fan, X. H. Zhao, L. Q. Zhang, L. Liu, Y. Zuo, Bonding properties between nitrile-butadiene rubber and aluminum alloy treated by anodizing methods, J. Appl. Polym. Sci., 112 (2008) 1, 283-289, doi:10.1002/app.29378
94 F. Wang, Y. Li, D. Wang, Adhesion enhancement for liquid silicone rubber and different surface by organosilane and Pt catalyst at room temperature, Bull. Mater. Sci., 36 (2013), 1013-1017, doi:10.1007/s12034-013-0575-8
95 A. Latifi, M. Imani, M. T. Khorasani, M. D. Joupari, Plasma surface oxidation of 316L stainless steel for improving adhesion strength of silicon rubber coating to metal substrate, Appl. Surf. Sci., 320 (2014), 471-481, doi:10.1016/j.apsusc.2014.09.084
96 T. Renner, Improvement in production of rubber-metal parts for the automotive industry, Int. Polym. Sci. Technol., 41 (2014) 2, 779-784,
doi:10.1177/0307174X1404100201
97 A. Souid, A. Sarda, R. Deterre, E. Leroy, Influence of reversion on adhesion in the rubber-to-metal vulcanization-bonding process, Polym. Test., 41 (2015), 157-162, doi:10.1016/j.polymertesting.2014.11.007
98 C. Vandenabeele, S. Bulou, R. Maurau, F. Siffer, T. Belmonte, P. Choquet, Organo-chlorinated thin films deposited by atmospheric pressure plasma-enhanced chemical vapor deposition for adhesion enhancement between rubber and zinc-plated steel monofilaments, ACS Appl. Mater. Interfaces, 7 (2015) 26, 14317-14327, doi:10.1021/acsami.5b02887
99 D. Pradhan, R. Ghosh, A. Banerjee, M. Dutta, Effect of electro-cleaning roughness on steel wire-rubber adhesion strength, Surf. Coat. Technol., 286 (2016), 293-302, doi:10.1016/j.surfcoat.2015.12.048
100 C. Günsoy, Mekanik ve kimyasal yüzey işlemlerinin poliakrilik kauçuk ve EN10130 DC01 çeliği yapışmasına etkilerinin incelenmesi, Master’s Thesis, Kocaeli University, Kocaeli, Turkey, 2018
101 F. Mıhçı, Improvement of Metal-EPDM rubber adhesion by plasma surface modification, Master’s Thesis, Sakarya University, Sakarya, Turkey, 2018
102 Q. Ahsan, A. F. A. Mawardi, S. Subramonian, M. R. Alkahari, A. Putra, (eds: M. N. O. Zahid, R. A. Aziz, A. R. Yusoff, N. M. Yahya, F. A. Aziz, M. Y. Abu), in IMEC- APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and the 5th Asia Pacific Conference on manufacturing systems, Springer, Singapore 2020, Doi:10.1007/978-981-15-0950-6
103 N. Gong, B. Wang, Y. Wang, X. Li, W. Lin, S. Fu, X. Chu, Effect of metal surface state on injection joining strength of aluminum-rubber composite part, J. Manuf. Process, 49 (2020), 365-372, doi:10.1016/j.jmapro.2019.12.006
104 A. Grard, L. Belec, F. X. Perrin, Effect of surface morphology on the adhesion of silicon elastomers on AA6061 aluminum alloy, Int. J. Adhes. Adhes., 102 (2020), 102656, doi:10.1016/j.ijadhadh.2020.102656
105 E. Sarlin, A. Rosling, M. Honkanen, M. Lindgren, M. Juutilainen, M. Poikelispää, P. Laihonen, M. Vippola, J. Vuorinen, Effect of environment on bromobutyl rubber-steel adhesion, Rubber Chem. Technol., 93 (2020) 2, 429-444, doi:10.5254/rct.19.80455
106 E. Sarlin, M. Honkanen, M. Lindgren, P. Laihonen, M. Juutilainen, M. Vippola, J. Vuorinen, The effect of substrate pre-treatment on durability of rubber-stainless steel adhesion, Surf. Interfaces, 21 (2020), 100646, doi:10.1016/j.surfin.2020.100646
107 R. H. Abdullah, A. F. Essa, Measuring the peeling strength between polymers (low density polyethylene, ethylene propylene diene monomer (EPDM) rubber) and brass and evaluating the effect of thermal and chemical oxidation on the metal, Mater. Today: Proc., 47 (2021), 5992-5998, doi:10.1016/j.matpr.2021.04.547
108 L. N. Andreikova, Y. O. Andriasyan, I. I. Abol’skaya, Simulation of the durability of adhesive joints during operation of rubber-metallic products, Polym. Sci., Ser. D, 15 (2022) 4, 586-589, doi:10.1134/S1995421222040335
109 S. V. Kuteneva, S. V. Gladkovsky, D. I. Vichuzhanin, P. D. Nedzvetsky, Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading, Compos. Struct., 285 (2022), 115078, doi:10.1016/j.compstruct.2021.115078
Published
2024-12-03
How to Cite
1.
Kutlubay RC, Sekercioglu T. INVESTIGATION OF THE FACTORS AFFECTING THE STRENGTH OF A METAL-RUBBER INTERFACE JOINED BY VULCANIZATION: A REVIEW. MatTech [Internet]. 2024Dec.3 [cited 2026Oct.11];58(6):683–698. Available from: https://mater-tehnol.si/index.php/MatTech/article/view/1183
Section
Articles
