INFLUENCE OF DIFFERENT TREATMENTS ON THE CORROSION BEHAVIOUR OF AN Fe-BASED BIODEGRADABLE ALLOY
Keywords:
Fe-based biodegradable material, microstructure characterization, corrosion initials, mechanical properties
Abstract
Biodegradable alloys are required for medical applications involving temporary implants that must last for a certain time. Fe-based alloys were produced to last longer than Mg- or Zn-based alternatives, while retaining a biodegradable characteristic so that no additional operation is necessary to remove the implant. The investigation of commonly used Fe-based alloys was directed towards a better corrosion resistance, while our aim was to produce a material that will corrode easily, but would initially still have mechanical properties like Fe-based materials. This aim was achieved by using different production steps, and the corrosion properties were found to be dependent on modifications to the microstructure.
References
1 M. Schinhammer, A. C. Hänzi, J. F. Löffler, P. J. Uggowitzer, Design strategy for biodegradable Fe-based alloys for medical applications, Acta Biomaterialia 6 (2010) 1705–1713, doi:10.1016/j.actbio.2009. 07.039
2 Revie WR, Uhlig HH. Corrosion and corrosion control. New York: John Wiley, 2008
3 A. Kawashima, K. Asami, K. Hashimoto, Effect of manganese on the corrosion behaviour of chromium-bearing amorphous metal-metalloid alloys, Sci Rep Res Inst Tohoku Univ Phys Chem Metall 29 (1981) 2, 276–83
4 H. Hermawan, D. Dubé, D. Mantovani, Degradable metallic bio¬materials: Design and development of Fe–Mn alloys for stents, Journal of Biomedical Materials Research Part A, 93 (2010) 1, 1–11, doi:10.1002/jbm.a.32224
5 H. Hermawan, Biodegradable Metals: From Concept to Applications, 1st ed., Springer, Berlin 2012, 69, doi:10.1007/978-3-642-31170-3
6 Y. F. Zheng, X. N. Gu, F. Witte, Biodegradable metals, Materials Science and Engineering: R: Reports, 77 (2014) 1–34, doi:10.1016/ j.mser.2014.01.001
7 B. Liu, Y. F. Zheng, L. Ruan, In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material, Materials Letters, 65 (2011) 3, 540–543, doi:10.1016/j.matlet. 2010.10.068
8 D. Vojtěch, J. Kubásek, J. Čapek, I. Pospíšilová, Comparative mechanical and corrosion studies on magnesium, zinc and iron alloys as biodegradable metals, Materials and technology, 49 (2015) 6, 877–882, doi:10.17222/mit.2014.129
9 J. Čapeka, J. Kubásek, D. Vojtěch, E. Jablonská, J. Lipov, T. Ruml, Microstructural, mechanical, corrosion and cytotoxicity characterization of the hot forged FeMn30(wt.%) alloy, Materials Science and Engineering: C1m 58 (2016), 900–908, doi:10.1016/j.msec.2015. 09.049
10 M. C. Conti, Daniel, A. J. Buhagiar, Influence of cold rolling on in vitro cytotoxicity and electrochemical behaviour of an Fe-Mn-C biodegradable alloy in physiological solutions, Heliyon vol. 4 (2018) 11, doi:10.1016/j.heliyon.2018.e00926
11 P. S. Baghaa, M. Khakbiza, S. Sheibanib, H. Hermawan, Design and characterization of nano and bimodal structured biodegradable Fe-Mn-Ag alloy with accelerated corrosion rate, Journal of Alloys and Compounds, 767 (2018) 955–965, doi:10.1016/j.jallcom.2018. 07.206
12 J. Kubásek, I. Pospísilová, D. Vojtìch, E. Jablonská, T. Ruml, Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x = 0.8–8.3 %) alloys, Mater. Tehnol., 48 (2014) 5, 623–629
13 D. Pihura, M. Oruč, J. Lamut, Selective oxidation of manganese in molten pig iron, Mater. Tehnol., 44 (2010) 5, 235–238
14 Č. Donik, A. Kocijan, I. Paulin, M. Hočevar, P. Gregorčič, M. Godec, Improved Biodegradability of Fe–Mn Alloy After Modification of Surface Chemistry and Topography by a Laser Ablation, Applied Surface Science (2018), 453, doi:10.1016/j.apsusc.2018.05.066
15 A. D. P. Bankoff, Biomechanical Characteristics of the Bone, Human Musculoskeleta Biomechanics, T. Goswami (ed.), InTech, (2012) 61–86, doi:10.5772/19690
16 Mechanical properties of bone, DoITPoMS, University of Cambridge (August 2011), http://www.doitpoms.ac.uk/tlplib/bones/ bone_mecha¬nical.php
17 C. S. Obayi, R. Tolouei, A. Mostavan, C. Paternoster, S. Turgeon, B. A. Okorie, D. O. Obikwelu, D. Mantovani, Effect of grain sizes on mechanical properties and biodegradation behavior of pure iron for cardiovascular stent application; Biomatter. 6 (2016) 1; e959874 (9 pages), doi:10.4161/21592527.2014.959874.
2 Revie WR, Uhlig HH. Corrosion and corrosion control. New York: John Wiley, 2008
3 A. Kawashima, K. Asami, K. Hashimoto, Effect of manganese on the corrosion behaviour of chromium-bearing amorphous metal-metalloid alloys, Sci Rep Res Inst Tohoku Univ Phys Chem Metall 29 (1981) 2, 276–83
4 H. Hermawan, D. Dubé, D. Mantovani, Degradable metallic bio¬materials: Design and development of Fe–Mn alloys for stents, Journal of Biomedical Materials Research Part A, 93 (2010) 1, 1–11, doi:10.1002/jbm.a.32224
5 H. Hermawan, Biodegradable Metals: From Concept to Applications, 1st ed., Springer, Berlin 2012, 69, doi:10.1007/978-3-642-31170-3
6 Y. F. Zheng, X. N. Gu, F. Witte, Biodegradable metals, Materials Science and Engineering: R: Reports, 77 (2014) 1–34, doi:10.1016/ j.mser.2014.01.001
7 B. Liu, Y. F. Zheng, L. Ruan, In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material, Materials Letters, 65 (2011) 3, 540–543, doi:10.1016/j.matlet. 2010.10.068
8 D. Vojtěch, J. Kubásek, J. Čapek, I. Pospíšilová, Comparative mechanical and corrosion studies on magnesium, zinc and iron alloys as biodegradable metals, Materials and technology, 49 (2015) 6, 877–882, doi:10.17222/mit.2014.129
9 J. Čapeka, J. Kubásek, D. Vojtěch, E. Jablonská, J. Lipov, T. Ruml, Microstructural, mechanical, corrosion and cytotoxicity characterization of the hot forged FeMn30(wt.%) alloy, Materials Science and Engineering: C1m 58 (2016), 900–908, doi:10.1016/j.msec.2015. 09.049
10 M. C. Conti, Daniel, A. J. Buhagiar, Influence of cold rolling on in vitro cytotoxicity and electrochemical behaviour of an Fe-Mn-C biodegradable alloy in physiological solutions, Heliyon vol. 4 (2018) 11, doi:10.1016/j.heliyon.2018.e00926
11 P. S. Baghaa, M. Khakbiza, S. Sheibanib, H. Hermawan, Design and characterization of nano and bimodal structured biodegradable Fe-Mn-Ag alloy with accelerated corrosion rate, Journal of Alloys and Compounds, 767 (2018) 955–965, doi:10.1016/j.jallcom.2018. 07.206
12 J. Kubásek, I. Pospísilová, D. Vojtìch, E. Jablonská, T. Ruml, Structural, mechanical and cytotoxicity characterization of as-cast biodegradable Zn-xMg (x = 0.8–8.3 %) alloys, Mater. Tehnol., 48 (2014) 5, 623–629
13 D. Pihura, M. Oruč, J. Lamut, Selective oxidation of manganese in molten pig iron, Mater. Tehnol., 44 (2010) 5, 235–238
14 Č. Donik, A. Kocijan, I. Paulin, M. Hočevar, P. Gregorčič, M. Godec, Improved Biodegradability of Fe–Mn Alloy After Modification of Surface Chemistry and Topography by a Laser Ablation, Applied Surface Science (2018), 453, doi:10.1016/j.apsusc.2018.05.066
15 A. D. P. Bankoff, Biomechanical Characteristics of the Bone, Human Musculoskeleta Biomechanics, T. Goswami (ed.), InTech, (2012) 61–86, doi:10.5772/19690
16 Mechanical properties of bone, DoITPoMS, University of Cambridge (August 2011), http://www.doitpoms.ac.uk/tlplib/bones/ bone_mecha¬nical.php
17 C. S. Obayi, R. Tolouei, A. Mostavan, C. Paternoster, S. Turgeon, B. A. Okorie, D. O. Obikwelu, D. Mantovani, Effect of grain sizes on mechanical properties and biodegradation behavior of pure iron for cardiovascular stent application; Biomatter. 6 (2016) 1; e959874 (9 pages), doi:10.4161/21592527.2014.959874.
Published
2021-03-16
How to Cite
1.
Paulin I. INFLUENCE OF DIFFERENT TREATMENTS ON THE CORROSION BEHAVIOUR OF AN Fe-BASED BIODEGRADABLE ALLOY. MatTech [Internet]. 2021Mar.16 [cited 2026Sep.8];55(1):155-8. Available from: https://mater-tehnol.si/index.php/MatTech/article/view/108
Section
Articles
